EAW210 PA66 Wear Low Friction

EAW210

wear-resistant and low-friction PA66 compound for sliding, moving and tribological molded parts. The recorded profile for this grade lists specific gravity 1.2, tensile stress 80 MPa, and HDT 65 degrees C. Confirm final suitability against the molded part and processing conditions.

Document Support

TDSSDSCOAREACHRoHS

REACH / RoHS support available upon request.

Request Full TDS Request Sample

Core Selection Data

Reference Values for Early Screening

Property	Value	Unit	Test Method
Specific gravity	1.2		ISO 1183
Tensile stress	80	MPa	ISO 527
Tensile modulus	2800	MPa	ISO 527
Flexural modulus	2900	MPa	ISO 178
Charpy impact strength(Notched) @ 23 °C	4	kJ/m²	ISO 179/1eA
Heat deflection temperature (1.8 MPa)	65	°C	ISO 75

Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.

Request Full TDS

Grade Characteristics

PA66 Wear Low Friction compound direction
Modified compound direction for project review
HB flammability reference
Final selection should be confirmed against part design and molding conditions

Typical Applications

Gears
bushings
rollers
sliding blocks
guide parts and motion components.

Material Evaluation Notes

This grade page is for preliminary material selection. For project evaluation, please confirm the application, processing method, mold development stage, cavity count, target dimensional requirement, target performance requirements, current reference grade, document requirements, and estimated volume.

Inquiry Preparation

Prepare a Grade Evaluation

Send the application, key performance requirements, mold stage, cavity count, dimensional concern, current material or reference grade, document needs, and estimated volume. These inputs identify the next grade, document, and sample steps for the project.

Request Grade Evaluation