EAW610 PPA Wear Low Friction

EAW610

EAW610: 30% wear-resistant and low-friction PPA compound for sliding, moving and tribological molded parts. The recorded profile for this grade lists specific gravity 1.56, tensile stress 200 MPa, and HDT 275 degrees C.

Document Support

TDS

SDS, COA, REACH and RoHS documents are available on request, confirmed by grade and project.

Request Full TDS Request Sample

Core Selection Data

Reference Values for Early Screening

Property	Value	Unit	Test Method
Specific gravity	1.56		ISO 1183
Tensile stress	200	MPa	ISO 527
Flexural modulus	10600	MPa	ISO 178
Charpy impact strength(Notched) @ 23 °C	11	kJ/m²	ISO 179/1eA
Heat deflection temperature (1.8 MPa)	275	°C	ISO 75

Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.

Request Full TDS

Grade Characteristics

PPA Wear Low Friction formulation
30% filler or reinforcement reference
HB flammability reference

Typical Applications

Gears
bushings
rollers
sliding blocks
guide parts and motion components.

Material Evaluation Notes

Use these reference values for preliminary screening only. Confirm final suitability with current technical documents, molded-part trials, processing conditions, and project-specific requirements.

Inquiry Preparation

Prepare a Grade Evaluation

Send the application, key performance requirements, mold stage, cavity count, dimensional concern, current material or reference grade, document needs, and estimated volume. These inputs identify the next grade, document, and sample steps for the project.

Request Grade Evaluation