Core Selection Data
Reference Values for Early Screening
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.38 | g/cm3 | ISO 1183 |
| Melt Flow Rate (MFI) | 6 | g/10 min | ISO 1133, 195 °C/2.16 kg |
| Molding Shrinkage | 1.8-2.0 | % | Internal Method |
| Tensile Strength | 52 | MPa | ISO 527 |
| Flexural Modulus | 1600 | MPa | ISO 178 |
| Charpy Notched Impact Strength | 13 | kJ/m2 | ISO 179/1eA |
| Heat Deflection Temperature | 95 | °C | ISO 75-2, 1.8 MPa |
Suggested maximum moisture for POM processing: 0.2-0.4 %
Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.
Request Full TDSKey Features
- Impact-Modified POM
- Low-Temperature Resistance
- Natural Color
Typical Applications
- Automotive Parts
- Electrical and Electronic Components
- Sanitary Fittings
- Industrial Molded Parts
Material Evaluation Notes
Use these reference values for preliminary screening only. Confirm final suitability with current technical documents, molded-part trials, processing conditions, and project-specific requirements.
Inquiry Preparation
Prepare a Grade Evaluation
Send the application, key performance requirements, mold stage, cavity count, shrinkage or warpage concern, current material or reference grade, document needs, and estimated volume. These inputs identify the next grade, document, and sample steps for the project.