ECF400 Carbon Fiber Reinforced POM Compound

ECF400

40% carbon-fiber reinforced POM for molded parts that need increased stiffness, dimensional stability, and conductive black material performance. The recorded profile for this grade lists MFI 4 g/10 min, tensile strength 100 MPa, and HDT 162 degrees C. Confirm final suitability against the molded part and processing conditions.

Document Support

TDSSDSCOAREACHRoHS

REACH / RoHS support available upon request.

Request Full TDS Request Sample

Core Selection Data

Reference Values for Early Screening

Property	Value	Unit	Test Method
Density	1.45	g/cm³	ISO 1183
Melt Flow Rate (MFI)	4	g/10 min	ISO 1133, 195 °C/2.16 kg
Molding Shrinkage	0.8-0.9	%	Internal Method
Tensile Strength	100	MPa	ISO 527
Flexural Modulus	7200	MPa	ISO 178
Charpy Notched Impact Strength	6	kJ/m²	ISO 179/1eA
Heat Deflection Temperature	162	°C	ISO 75-2, 1.8 MPa

Suggested maximum moisture for POM processing: 0.2-0.4 %

Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.

Request Full TDS

Key Features

40% Carbon Fiber Content
High Stiffness
Conductive Black Grade

Typical Applications

Automotive Functional Parts
Electrical and Electronic Components
Industrial Molded Parts

Material Evaluation Notes

This product page is for preliminary material selection. For project evaluation, please confirm the application, processing method, mold development stage, cavity count, target shrinkage or dimensional requirement, target performance requirements, current reference grade, document requirements, and estimated volume.

Inquiry Preparation

Prepare a Grade Evaluation

Send the application, key performance requirements, mold stage, cavity count, shrinkage or warpage concern, current material or reference grade, document needs, and estimated volume. These inputs identify the next grade, document, and sample steps for the project.

Request Grade Evaluation