Core Selection Data
Reference Values for Early Screening
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.39 | g/cm3 | ISO 1183 |
| Molding Shrinkage | 1.8-2.0 | % | Internal Method |
| Tensile Strength | 56 | MPa | ISO 527 |
| Flexural Modulus | 2500 | MPa | ISO 178 |
| Charpy Notched Impact Strength | 5.5 | kJ/m2 | ISO 179/1eA |
| Heat Deflection Temperature | 110 | °C | ISO 75-2, 1.8 MPa |
Suggested maximum moisture for POM processing: 0.2-0.4 %
Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.
Request Full TDSKey Features
- Conductive Grade
- Black Color
- Dimensional Stability
Typical Applications
- Electronic Components
- Antistatic Molded Parts
- Functional Plastic Parts
Grade Evaluation Path
Move from data screening to a molding decision
ECN1003B is offered as a candidate grade for evaluation. Final approval should follow the customer's own molding trial and part requirements.
- 01Share the application
Part geometry, process, current material, and key targets.
- 02Review data and sample
Confirm documents, grade direction, color, and sample needs.
- 03Validate in your process
Check filling, dimensions, appearance, and end-use performance.
Material Evaluation Notes
This page supports preliminary ECN1003B screening. Confirm suitability against part design, mold construction, processing conditions, performance targets, customer requirements, current technical documents, sampling, and application testing.
Continue the comparison with the conductive and antistatic POM selection overview or the cross-material conductive compound directory.
ECN1003B Project Review
Ready to screen ECN1003B for your molded part?
Send the application, processing method, current material, target properties, color, estimated volume, and required documents. We can prepare the grade review and sample discussion.