Core Selection Data
Reference Values for Early Screening
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.55 | g/cm3 | ISO 1183 |
| Melt Flow Rate (MFI) | 8.5 | g/10 min | ISO 1133, 195 degC/2.16 kg |
| Molding Shrinkage | 1.5-1.6 | % | Internal Method |
| Tensile Strength | 40 | MPa | ISO 527 |
| Flexural Modulus | 2400 | MPa | ISO 178 |
| Charpy Notched Impact Strength | 4 | kJ/m2 | ISO 179/1eA |
| Heat Deflection Temperature | 110 | °C | ISO 75-2, 1.8 MPa |
Suggested maximum moisture for POM processing: 0.2-0.4 %
Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.
Request Full TDSKey Features
- 25% Glass Bead Content
- Balanced Longitudinal and Transverse Shrinkage Direction
- Heat Deflection Temperature: 110 DegC At 1.8 MPa
- Natural Color
Typical Applications
- Automotive Components
- Electrical and Electronic Components
- Sanitary Components
- Industrial Molded Parts
Grade Evaluation Path
Move from data screening to a molding decision
EGB25 is offered as a candidate grade for evaluation. Final approval should follow the customer's own molding trial and part requirements.
- 01Share the application
Part geometry, process, current material, and key targets.
- 02Review data and sample
Confirm documents, grade direction, color, and sample needs.
- 03Validate in your process
Check filling, dimensions, appearance, and end-use performance.
Material Evaluation Notes
This page supports preliminary EGB25 screening. Confirm suitability against part design, mold construction, processing conditions, performance targets, customer requirements, current technical documents, sampling, and application testing.
EGB25 Project Review
Ready to screen EGB25 for your molded part?
Send the application, processing method, current material, target properties, color, estimated volume, and required documents. We can prepare the grade review and sample discussion.