Core Selection Data
Reference Values for Early Screening
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.41 | g/cm3 | ISO 1183 |
| Melt Flow Rate (MFI) | 3.7 | g/10 min | ISO 1133, 195 °C/2.16 kg |
| Molding Shrinkage | 1.0-1.1 | % | Internal Method |
| Tensile Strength | 80 | MPa | ISO 527 |
| Flexural Modulus | 3200 | MPa | ISO 178 |
| Charpy Notched Impact Strength | 5 | kJ/m2 | ISO 179/1eA |
| Heat Deflection Temperature | 136 | °C | ISO 75-2, 1.8 MPa |
Suggested maximum moisture for POM processing: 0.2-0.4 %
Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.
Request Full TDSKey Features
- 10% Aramid Fiber Content
- High Wear-Resistant Direction
- Higher HDT Performance
Typical Applications
- Automotive Functional Parts
- Electrical and Electronic Components
- Sanitary Fittings
- Industrial Molded Parts
Grade Evaluation Path
Move from data screening to a molding decision
EPAF100A is offered as a candidate grade for evaluation. Final approval should follow the customer's own molding trial and part requirements.
- 01Share the application
Part geometry, process, current material, and key targets.
- 02Review data and sample
Confirm documents, grade direction, color, and sample needs.
- 03Validate in your process
Check filling, dimensions, appearance, and end-use performance.
Material Evaluation Notes
This page supports preliminary EPAF100A screening. Confirm suitability against part design, mold construction, processing conditions, performance targets, customer requirements, current technical documents, sampling, and application testing.
EPAF100A Project Review
Ready to screen EPAF100A for your molded part?
Send the application, processing method, current material, target properties, color, estimated volume, and required documents. We can prepare the grade review and sample discussion.