Core Selection Data
Reference Values for Early Screening
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.39 | g/cm3 | ISO 1183 |
| Melt Flow Rate (MFI) | 9 | g/10 min | ISO 1133, 195 °C/2.16 kg |
| Molding Shrinkage | 1.8-2.0 | % | Internal Method |
| Tensile Strength | 58 | MPa | ISO 527 |
| Flexural Modulus | 2450 | MPa | ISO 178 |
| Charpy Notched Impact Strength | 8.5 | kJ/m2 | ISO 179/1eA |
| Heat Deflection Temperature | 90 | °C | ISO 75-2, 1.8 MPa |
Suggested maximum moisture for POM processing: 0.2-0.4 %
Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.
Request Full TDSKey Features
- Low-Density Direction
- High-Impact Direction
- Injection Molding
- Natural Color
Typical Applications
- Precision Engineering Plastic Parts
- Automotive Components
- Electrical and Electronic Parts
- Industrial Molded Parts
Grade Evaluation Path
Move from data screening to a molding decision
XT-100 is offered as a candidate grade for evaluation. Final approval should follow the customer's own molding trial and part requirements.
- 01Share the application
Part geometry, process, current material, and key targets.
- 02Review data and sample
Confirm documents, grade direction, color, and sample needs.
- 03Validate in your process
Check filling, dimensions, appearance, and end-use performance.
Material Evaluation Notes
This page supports preliminary XT-100 screening. Confirm suitability against part design, mold construction, processing conditions, performance targets, customer requirements, current technical documents, sampling, and application testing.
XT-100 Project Review
Ready to screen XT-100 for your molded part?
Send the application, processing method, current material, target properties, color, estimated volume, and required documents. We can prepare the grade review and sample discussion.