Core Selection Data
Reference Values for Early Screening
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.43 | g/cm3 | ISO 1183 |
| Melt Flow Rate (MFI) | 7 | g/10 min | ISO 1133, 195 °C/2.16 kg |
| Molding Shrinkage | 1.8-2.0 | % | Internal Method |
| Tensile Strength | 65 | MPa | ISO 527 |
| Flexural Modulus | 2600 | MPa | ISO 178 |
| Charpy Notched Impact Strength | 7 | kJ/m2 | ISO 179/1eA |
| Heat Deflection Temperature | 115 | °C | ISO 75-2, 1.8 MPa |
Suggested maximum moisture for POM processing: 0.2-0.4 %
Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.
Request Full TDSKey Features
- MoS2-filled Direction
- High Wear-Resistant Direction
- Black Color
Typical Applications
- Sliding Parts
- Automotive Functional Parts
- Electrical and Electronic Components
- Industrial Molded Parts
Material Evaluation Notes
This product page is for preliminary material selection. For project evaluation, please confirm the application, processing method, mold development stage, cavity count, target shrinkage or dimensional requirement, target performance requirements, current reference grade, document requirements, and estimated volume.
Continue the comparison with the MoS2 and wear-resistant POM selection guide or the wear-resistant and low-friction POM grades or the wear-resistant POM compound options.
Inquiry Preparation
Prepare a Grade Evaluation
Send the application, key performance requirements, mold stage, cavity count, shrinkage or warpage concern, current material or reference grade, document needs, and estimated volume. These inputs identify the next grade, document, and sample steps for the project.