Core Selection Data
Reference Values for Early Screening
| Property | Value | Unit | Test Method |
|---|---|---|---|
| Specific gravity | 1.23 | ISO 1183 | |
| Tensile stress | 120 | MPa | ISO 527 |
| Tensile modulus | 6100 | MPa | ISO 527 |
| Flexural modulus | 5500 | MPa | ISO 178 |
| Charpy impact strength(Notched) @ 23 °C | 7 | kJ/m2 | ISO 179/1eA |
| Heat deflection temperature (1.8 MPa) | 205 | °C | ISO 75 |
Core comparison values are shown here. Full property, processing, impact, electrical, and project-specific data are provided through TDS or project review.
Request Full TDSGrade Characteristics
- Within the listed 15% glass-fiber PA6 group, EAG115 has the highest published flexural strength; EAG115H has higher flexural modulus and notched impact, while EAG115U has the highest published notched impact.
- 15% filler or reinforcement reference
- HB flammability reference
Typical Applications
- Structural housings
- brackets
- supports and precision molded components screened for moderate glass-fiber reinforcement.
Material Evaluation Notes
Compare conditioned dimensions and mechanical performance under the same moisture state, test method and part geometry before final selection. Confirm the required balance through molding trials on the intended tool.
Inquiry Preparation
Prepare a Grade Evaluation
Send the application, key performance requirements, mold stage, cavity count, dimensional concern, current material or reference grade, document needs, and estimated volume. These inputs identify the next grade, document, and sample steps for the project.